Aluminum Strip
Aluminum Strip is made of wide coils which are flat rolled products produced through hot rolling mills and cold rolling mills. When the wide coil is passed through a slitting machine, it is divided into several narrow width strips with desired widths. Those widths can be equal or not equal as request. It is commonly used under 4.0 mm which is rolled through a cold rolling process. Like coil, strip is also available for both direct-chill (DC) casting material and continuous casting (CC) material.
Specification
Standard Specification
GB/T 3880
ASTM B209
EN 485
Available Size Range
-
Thickness :
0.2 ~ 4.0 mm
-
Width :
20 ~ 600 mm
*The minimum width depends on thickness
Standard Width and Length
No standard widths, as per customer’s request
Surface Finish
Mill finish, unless otherwise specified
Surface Protection
With PE/PVC film on main side (if specified)
With PE/PVC filmed on main side (if specified)
Coil ID
405mm, 505mm
Minimum Order Quantity
5MT per size, total 20MT for one order
Alloy and Temper
| Alloy | Temper |
|---|---|
| 1000 Series: 1050,1051A, 1060, 1100 | O, F, H12, H14, H16, H18, H22, H24, H26, H28 |
| 3000 Series: 3003, 3004, 3005, 3105 | |
| 5000 Series: 5005, 5052, 5754, 5083, 5086, 5182, 5049, 5251, 5454 | O, F, H22, H24, H26, H28, H32, H34, H36, H38 |
| Alloy Series | Chinese Standard | American Standard | European Standard |
|---|---|---|---|
| 1000 Series | 1050 | - | - |
| 1050A | - | EN AW-1050A | |
| 1060 | 1060 | - | |
| 1100 | 1100 | - | |
| 3000 Series | 3003 | 3003 | EN AW-3003 |
| 3004 | 3004 | EN AW-3004 | |
| 3005 | 3005 | EN AW-3005 | |
| 3105 | 3105 | EN AW-3105 | |
| 5000 Series | 5005 | 5005 | EN AW-5005 |
| 5052 | 5052 | EN AW-5052 | |
| 5754 | 5754 | EN AW-5754 | |
| 5083 | 5083 | EN AW-5083 | |
| 5086 | 5086 | EN AW-5086 | |
| 5182 | - | EN AW-5182 | |
| 5049 | - | EN AW-5049 | |
| 5251 | - | EN AW-5251 | |
| 5454 | 5454 | EN AW-5454 |
| Temper | Definition |
|---|---|
| F | As fabricated (no mechanical property limits specified) |
| O | Annealed |
| H12 H14 H16 H18 |
Strain Hardened, 1/4 Hard Strain Hardened, 1/2 Hard Strain Hardened, 3/4 Hard Strain Hardened, Full Hard |
| H22 H24 H26 H28 |
Strain Hardened and Partially Annealed, 1/4 Hard Strain Hardened and Partially Annealed, 1/2 Hard Strain Hardened and Partially Annealed, 3/4 Hard Strain Hardened and Partially Annealed, Full Hard |
| H32 H34 H36 H38 |
Strain Hardened and Stabilized, 1/4 Hard Strain Hardened and Stabilized, 1/2 Hard Strain Hardened and Stabilized, 3/4 Hard Strain Hardened and Stabilized, Full Hard |