Aluminum Plate
Aluminum Plate is a rolled product that is rectangular in cross section and with thickness not less than 6.0mm (or 0.250 inches) with sheared or sawed edges. It is produced either by hot rolled or cold rolled process in coil, and then cut to length. Aluminum thick plate can also be produced by piece directly in straight length, depending on thickness. To obtain excellent properties, the plate (especially for heat treatable alloy) is usually processed by complicated and technical heat treatment. Besides, it is widely used in general industrial fabrication, and it is also used in the military and aerospace industry.
Specification
Standard Specification
GB/T 3880
ASTM B209
EN 485
Available Size Range
-
Thickness :
6.0 ~ 120 mm for plate
-
Width :
600 ~ 2,200 mm
-
Length :
2,000 ~ 10,000 mm
Standard Width and Length
1000x2000mm, 1250x2500mm, 1500x3000mm, 1219x2438mm, 1524x3048mm, 1270x2520mm, 1520x3020mm
Surface Finish
Mill Finish, unless otherwise specified
Surface Protection
Paper interleaved, PE/PVC filming (if specified)
Minimum Order Quantity
3~5MT per size, total 20MT for one order
Alloy and Temper
Alloy | Temper |
---|---|
1000 Series: 1050,1051A, 1060, 1100 | O, H111, H14, H24, H112 |
3000 Series: 3003, 3004, 3005, 3105 | |
5000 Series: 5005, 5052, 5754, 5083, 5086, 5182, 5049, 5251, 5454 |
O, H111, H32, H34, H112 |
6000 Series: 6061, 6082 | T4, T6, T451, T651 |
2000 Series: 2014, 2017,2024 | T3, T4, T351, T451 |
7000 Series: 7075 | T6, T651 |
Alloy Series | Chinese Standard | American Standard | European Standard |
---|---|---|---|
1000 Series | 1050 | - | - |
1050A | - | EN AW-1050A | |
1060 | 1060 | - | |
1100 | 1100 | - | |
2000 Series | 2014 | 2014 | EN AW-2014 |
2017 | - | - | |
- | - | EN AW-2017A | |
2024 | 2024 | EN AW-2024 | |
3000 Series | 3003 | 3003 | EN AW-3003 |
3004 | 3004 | EN AW-3004 | |
3005 | 3005 | EN AW-3005 | |
3105 | 3105 | EN AW-3105 | |
5000 Series | 5005 | 5005 | EN AW-5005 |
5052 | 5052 | EN AW-5052 | |
5754 | 5754 | EN AW-5754 | |
5083 | 5083 | EN AW-5083 | |
5086 | 5086 | EN AW-5086 | |
5182 | - | EN AW-5182 | |
5049 | - | EN AW-5049 | |
5251 | - | EN AW-5251 | |
6000 Series | 6061 | 6061 | EN AW-6061 |
6082 | - | EN AW-6082 | |
7000 Series | 7075 | 7075 | EN AW-7075 |
Temper | Definition |
---|---|
F | As fabricated (no mechanical property limits specified) |
O | Annealed |
H111 | Annealed and slightly strain hardened (less than H11) |
H112 | Slightly strain harden from working at an elevated temperature or from limited amount of cold work |
H14 | Strain Hardened, 1/2 Hard |
H24 | Strain Hardened and Partially Annealed, 1/2 Hard |
H32 | Strain Hardened and Stabilized, 1/4 Hard |
H34 | Strain Hardened and Stabilized, 1/2 Hard |
T3 | Solution heat-treated, cold worked and naturally aged |
T351 | Solution heat-treated, cold worked, stress-relieved by stretching and naturally aged |
T4 | Solution heat-treated and naturally aged |
T451 | Solution heat-treated, stress-relieved by stretching and naturally aged |
T6 | Solution heat-treated and then artificially aged |
T651 | Solution heat-treated, stress-relieved by stretching and artificially aged |