Aluminum Foil
Aluminum Foil is aluminum prepared in thin metal leaves with a thickness of less than 0.2 mm. Aluminum foil is pliable and can be readily bent or wrapped around objects. Thin foils are fragile and are sometimes laminated to other materials such as plastics or paper to make them more useful.
Specification
Standard Specification
GB/T 3198
EN 546
Available Size Range
-
Thickness :
0.006 ~ 0.2 mm
-
Width :
200 ~ 1,800 mm
Surface Finish
One side bright, the other side matte (for double rolled)
Two sides bright (for single rolled)
Surface Treatment
Lubrication, Lamination, Coating
Core Type and Size
Type: Aluminum, Sheet, Fiber
Core ID: 75mm, 76.2mm, 150mm, 152.4mm, 300mm, 400mm
Alloy and Temper
Alloy | Temper |
---|---|
1000 Series: 1050,1050A, 1060, 1100, 1145,1235, 1200 | O, H14, H16, H18, H19, H22, H24, H26 |
3000 Series: 3003 | |
8000 Series: 8011, 8011A, 8079 | O, H18, H19, H22, H24, H26 |
Alloy Series | Chinese Standard | American Standard | European Standard |
---|---|---|---|
1000 Series | 1050 | - | - |
1050A | - | EN AW-1050A | |
1060 | 1060 | - | |
1100 | 1100 | - | |
1145 | 1145 | - | |
1200 | - | EN AW-1200 | |
1235 | 1235 | EN AW-1235 | |
3000 Series | 3003 | 3003 | EN AW-3003 |
8000 Series | 8011 | - | - |
8011A | - | EN AW-8011A | |
8079 | - | EN AW-8079 |
Temper | Definition |
---|---|
O | Annealed |
H14 H16 H18 H19 |
Strain Hardened, 1/2 Hard Strain Hardened, 3/4 Hard Strain Hardened, Full Hard Strain Hardened, Extra Hard |
H22 H24 H26 |
Strain Hardened and Partially Annealed, 1/4 Hard Strain Hardened and Partially Annealed, 1/2 Hard Strain Hardened and Partially Annealed, 3/4 Hard |
H28 | Strain Hardened and Partially Annealed, Full Hard |